- 您现在的位置：买卖IC网 > Sheet目录1168 > 71M6513H-DB (Maxim Integrated Products)BOARD DEMO 71M6513H ENERGY METER
71M6513/71M6513H Demo Board User’s Manual
1.10.2 DEMO CODE MPU PARAMETERS
In the Demo Code, certain MPU XRAM parameters have been given fixed addresses in order to permit easy
external access. These variables can be read via the serial interface, as described in section 1.7.1, with the )n$
command and written with the )n=xx command where n is the word address. Note that accumulation variables
are 64 bits long and are accessed with )n$$ (read) and )n=hh=ll (write) in the case of accumulation variables.
Default values are the values assigned by the Demo Code on start-up.
MPU INPUT PARAMETERS
All MPU Input Parameters are loaded by the MPU at startup and should not need adjustment during meter
calibration.
MPU Input Parameters for Metering
XRAM
Word
Address
Default
Value
Name
Description
For each element, if WSUM_X or VARSUM_X of that element exceeds
WCREEP_THR , the sample values for that element are not zeroed.
Otherwise, the accumulators for Wh, VARh, and VAh are not updated
and the instantaneous value of IRMS for that element is zeroed.
0x00
5917
WCREEP_THR
LSB = 9.4045*10 -13 VMAX IMAX Wh
Demo Code revision 3.04: The default value is 1536.
Demo Code revision 3.05: The default value 5917 is equivalent to
2.5Wh/h.
Bit 0:
Sets VA calculation mode.
0x01
0
CONFIG
0: V RMS *A RMS
1:
W 2 + VAR 2
Bit 1: Clears accumulators for Wh, VARh, VAh. This bit need not be
reset.
Demo Code revision 3.04: Not implemented (default = 0)
Demo Code revision 3.05: When the voltage exceeds this value, bit 5
in the MPU status word is set, and the MPU might choose to log a
0x02
136105056
PK_VTHR
warning. Event logs are not implemented in Demo Code.
LSB = 9.4045*10 -13 *VMAX 2 V 2 h RMS
The default value of 136105056 is equivalent to 407.3V RMS if VMAX =
600V and a 1-second accumulation interval is used.
Demo Code revision 3.04: Not implemented (default = 0)
Demo Code revision 3.05: When the current exceeds this value, bit 6
in the MPU status word is set, and the MPU might choose to log a
0x03
17695797
PK_ITHR
warning. Event logs are not implemented in Demo Code.
LSB = 9.4045*10 -13 *IMAX 2 V 2 h RMS
The default value of 17695797 is equivalent to 50.9A RMS if IMAX =
208A and a 1-second accumulation interval is used.
Page: 34 of 112
? 2005-2006 TERIDIAN Semiconductor Corporation
Revision 5.6
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
71M6515H-DB
BOARD DEMO 71M6515H ENERGY METER
71M6521FE-DB
BOARD DEMO FOR 71M6521FE
71M6531F-DB
BOARD DEMO 71M6531F
71M6533-DB
BOARD DEMO 71M6533
71M6534H-DB
BOARD DEMO 71M6534H
71M6541F-DB
DEMO BOARD 71M6541F
71M6543F-DB-CT
DEMO BOARD 71M6543F-DB-CT
72-CNV-5
CONVERTER RS-232 TO RS-422 5V
相关代理商/技术参数
71M6513H-IEL
制造商:未知厂家 制造商全称:未知厂家 功能描述:71M6513
71M6513H-IEL/F
功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IELR
功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IELR/F
功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IGT/F
功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IGTR/F
功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IGTR/F1
功能描述:计量片上系统 - SoC
RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513-IEL
制造商:未知厂家 制造商全称:未知厂家 功能描述:71M6513